Table F: Allowable Amperage of Conductors of 50 Volts or More

The Tables do not consider voltage drop for conductors under 50 volts. The values shown on the ampacity table are the maximum safe amperages which the conductor can carry on a continuous basis. They do not apply to intermittent starting loads such as motor start currents. Since all ANCOR Boat Cable is 105° C insulated, only that temperature rating is shown. Due to the higher ambient temperatures in engine spaces and the heat retention of large wire bundles, a “correction factor” must be used to derate the wire by increasing conductor size. Table F takes into consideration these factors and should be used to select conductor sizes for circuits over 50 volts. Note that for electrical systems under 50 volts, voltage drop is the controlling factor and the tables on pages 14 and 15 should be used.

*There is NO LIMIT on conductors in a bundle under 50 Volts.

• Note: These tables only apply for 105° C (221° F) wire and other premium wire and should not be used for lesser grades of wire and cable.
• Reprinted at the courtesy of the United States Coast Guard Electrical System Compliance Guideline.