You are here: Home > Marine Product Guides > Boat Steering System Guides > Outboard Steering System Guides

BayStar Outboard Steering

Overview
With mechanical steering you sacrifice a degree of comfort, and traditional hydraulic systems may be more than is needed on lower horsepower engines. The solution is finally here—BayStar!
Built in the tradition of the industry leading hydraulic steering, SeaStar, BayStar brings the same safety and comfort now common on larger outboard powered boats to outboard powered boats with a maximum 150 HP (total) or less.

……………………………………………………………………………………………………………………………………..

SeaStar Outboard Steering

SeaStar outboard hydraulic steering offers a very extensive range of engine and steering system alternatives. This guide will assist you in the selection of the steering system best suited to your boat.

Selecting the Outboard Steering System best suited for your boat:
1. Locate the type of boat you have in column A of the chart below.
2. From the chart, select the steering system best suited to your boat. You may want to review the specific features for each system.
3. Select from links on the right for a detailed component selection.
Front Mount System, Side Mount System or Splashwell Mount System.

Boat Description Front Mount System Side Mount System Splashwell Mount System Key
Column A Single Twin Single Twin Single Twin
Center Console*
Cruiser*
Fish “N’ Ski*
Other Fish Boat*
Runabout*
Bass Boat*
Inflatables*
Work/Commercial/Rescue*
A
A
A
A
A
A
A
A
A
A
N/A
A
A
N/A
B
A
B
B
B
B
N/A
N/A
N/A
B
B
B
B
B
N/A
N/A
N/A
B
B
B
N/A
B
N/A
N/A
B
B
B
B
N/A
B
N/A
N/A
B
B
A: Best Application
B: Good Application
N/A: Not Applicable

* Outboard engines featuring Power Steering require a steering input actuator.

………………………………………………………………………………………………………………………………………….

Product reference to types of Outboard Boats

Center Console
Boat with control station located on a centerline mounted console. Generally designed specifically for fishing. Boats may be single or dual engine
Cruiser
Cuddy/express/bridge cruiser primarily designed for cruising. It has overnight accommodations. Typically rigged with two steering stations. Boats may be single or dual engine.
Fish ‘N’ Ski
Single engine outboard powered boat designed for day fishing or skiing in protected waters.
Other Fish Boat
Boat primarily designed and equipped for offshore fishing. May be rigged with a second steering station. Boats may be single or dual engine.
Runabout
Intended for day boating. Typically a single engine but can be a dual engine boat. Includes tournament ski boats and performance outboards.
Bass Boat
Single engine outboard powered boat designed specifically for fishing in protected waters. Typically performance oriented.
Inflatables
Boats manufactured of waterproofed fabric which are inflated with air in order to achieve their shape. The bottom of the hull may be made of fabric or fiberglass. They typically have narrow transoms. Boats may be single or dual engine.
Work/ Commercial/ Rescue
Any of the previously listed applications involved in revenue producing or rescue activities. Typically a very severe service environment.

BayStar Outboard


INTRODUCTION
BayStar™˙hydraulic steering is brought to you by the manufacturers of SeaStarฎ, the most trusted name in pleasure boat steering. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior Teleflex Canada Limited Partnership design team, rigid ISO quality control and teamed with the finest materials and precision manufacturing—BayStar continues the tradition bringing comfort and safety to boating.

The BayStar steering system consists of a super low friction helm for smooth comfortable steering, a balanced cylinder–featuring a compact design that fits most splashwells. For your convenience two lengths of 20’ cut to fit tubing are supplies (2 x 20’ length), two bottles of hydraulic steering fluid, and one fill tube for easy fill and purge.

BayStar is NOT recommended for use with high performance, 150HP engines (such as Mercury Optimax 150HP engines).

BayStar is NOT recommended for use on any single engine, high speed boat (such as Bass Boats). Applications such as these should use SeaStar PRO systems only.

Features
• Patented No FeedBack™ Steering lock valves.
• 5 turns lock-to-lock.
• Up to 150 horsepower (total).
• Available either as separate components or as a complete system ready to install.
• Fixed cylinder.
• BayStar hydraulic tubing cut to suit application.
• Tilt option available.
• Requires 3” (76mm) cut-out hole in dash.
• Requires 21” (534mm) splashwell width.

CAUTION
BayStar is ONLY applicable for single station steering. DO NOT use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.

Notice
Tilt Helm HH4315 is available separately. Currently not available in kit form.

back to top……………………………………………………………………………………………………………………………….

Application Guide
BayStar Helm
BayStar Cylinders
BayStar Steering Kit
BayStar Cylinder Pivot Plates

back to top……………………………………………………………………………………………………………………………….

APPLICATION GUIDE

(Cylinders HC4645H/47H/48H/58H)

MANUFACTURER YEAR MODEL CYLINDER NOTES
FORCE 1985–DATE 90–150 HP HC4645H
HONDA 1992–DATE 30–90 HP HC4645H
1998–2009 115–130 HP HC4647H
2001–DATE 150 HP HC4645H
2003–DATE BF135 HP HC4645H
2010–DATE 115–150 HP HC4645H
JOHNSON / EVINRUDE 1977–1989 65–150 HP HC4648H
1991–DATE 40–150 HP HC4645H
1997–DATE 115 HP FICHT HC4658H See Notes 4, 5
1997–DATE 75–150 HP FICHT HC4645H
1998–DATE 40–140 HP 4-Stroke HC4658H See Notes 1, 4
MERCURY/MARINER 1984–DATE 75–150 HP HC4645H
NISSAN 1990–DATE 120–140 HP HC4645H
SUZUKI 1986–DATE 150 HP HC4645H
1996 ONLY 115–140 HP N/A
1987–2002 115–140 HP HC4645H See Note 1
1990–2000 90–100 HP HC4645H
1998–DATE 40–70 4-Stroke HC4645H See Note 1
2001–DATE 115–140 HP 4-Stroke HC4658H See Notes 1, 4
TOHATSU 1990–DATE 140–140 HP HC4645H
YAMAHA 1998–DATE 40–50 HP HC4645H See Note 2
1998–DATE 60 HP HC4645H See Note 3
1986–DATE 70–90 HP HC4645H See Note 1
1997–DATE 80–150 HP 4-Stroke HC4645H
2000–DATE 25–60 HP 4-Stroke HC4648H See Note 1
2010–DATE 70HP 4-Stroke HC4648H
YANMAR 1990–DATE 27–36 HP HC4645H

Notes
1. Requires Spacer kit part # HO5090
2. Engine clamp brackets must be cut or ground, and the engine through bolted onto the transom, or interference will occur, restricting engine trim and tilt.
3. Steering hook Yamaha Part # 63D-48511-00-4D must be installed
4. Cylinder HC4645 may be used in these applications. The pivot plate will need to be flipped before installation.
Instructions provided with Owner’s Manual.
5. Johnson 115 HP 2-Stroke enginnes, require the pivot plate to be flipped. See Note #4.

back to top……………………………………………………………………………………………………………………………….

BAYSTAR HELM

Part# HH4314
Super low friction helm for smooth comfortable steering.


back to top……………………………………………………………………………………………………………………………….

BAYSTAR CYLINDERS

Part# HC4645H, HC4647H, HC4648H and HC4658H
Balanced cylinder, featuring a compact design that fits most splashwells.


Part# HC4600
(No Longer Available. Replacement parts still available)
Balanced cylinder that fits most splashwells.


back to top……………………………………………………………………………………………………………………………….

BAYSTAR STEERING KITS

BayStar Steering kits come complete with everything needed for an install, (some engines require spacer kits and/or cylinder plate change, see application chart on page 1-5) the compact cylinder does not require the engine manufacturer drag link for connection. For your convenience two lengths of 20′ cut to fit tubing are supplied with the HK4200A and two lengths of 30′ cut to fit tubing are supplied with the HK4230A kit.

BayStar Steering Kit (HK4200A) Includes:
• 1 x BayStar helm pump (HH4314)
• 1 x BayStar Cylinder (HC4645H)
• 1 x BayStar Tubing kit (HT4420H, 2 x 20′ hoses)
• 2 x Hydraulic Steering Fluid (HA5430)
• 1 x Filler Kit (HA5438)

BayStar Steering Kit (HK4230A) Includes:
• 1 x BayStar helm pump (HH4314)
• 1 x BayStar Cylinder (HC4645H)
• 1 x BayStar Tubing kit (HT4430H, 2 x 30’ hoses)
• 2 x Hydraulic Steering Fluid (HA5430)
• 1 x Filler Kit (HA5438)

back to top……………………………………………………………………………………………………………………………….

BAYSTAR CYLINDER PIVOT PLATE

HC4645H compact cylinder is included in the BayStar steering kits. This cylinder can be converted to HC4658H by following instructions included with the product. If your engine requires use of a cylinder other than HC4645H or HC4658H, please refer to the figure below for the appropriate replacement pivot plate, which must be purchased separately.


Notes
Read and understand all related product instructions before performing any work on a hydraulic steering system.

SeaStar Kicker Cable Tie Bar

INTRODUCTION
This new Seastar product allows a user to manually steer an auxiliary engine (kicker motor) using their existing Seastar hydraulic steering system. Today this is accomplished with a variety of solid mechanical linkages between the main engine and the auxiliary engine. Teleflex has developed a patent pending design that incorporates a TFXtreme cable as the linkage between the two engines.

The Teleflex SeaStar Kicker Cable Tie Bar has been engineered for easy and secure installation on outboard powered vessels with popular Teleflex SeaStar hydraulic steering. By using a universal ABYC steering connection on the kicker motor, Teleflex has made it simpler than ever for builders, dealers and boaters to rig, operate and steer both motors simultaneously.

Features
• Flexible cable allows for adjustable locations of kicker motor.
• Allows independent trim/tilt of both engines.
• Allows full steering stroke of both engines.
• Simplified installation using universal ABYC steering connection (as per ABYC P17 & P21 standards) on kicker motor.
• Retrofittable to Seastar Front Mount Cylinders.
• Incorporates unique patented TFXtreme cable technology.

……………………………………………………………………………………………………………………………………………..

ORDER GUIDE

DESCRIPTION PART NO.
TFXtreme 40 series (20HP Maximum) HO61__

HO61XX kit includes :
1 Steering Cable Assembly (TFXtreme 40 series cable and a custom drilled out support rod)
1 Pivot Cylinder Drive Link-arm (connects the drive bracket to one side of the cable assembly)
1 Pivot Cylinder Drive Plate (allows for the link-arm to mount to the pivot cylinder pivot plate)
2 Support Brackets (keyed version for use with this product)
Fasteners

SeaStar Outboard Tandem Catamaran

HORSEPOWER LIMITATIONS
ENGINE CONFIGURATIONS MAXIMUM HORSEPOWER CYLINDER RECOMMENDED HELM PUMO NUMBER OF STEERING WHEEL TURNS
NON COUNTER-ROTATING UP TO 450HP HC5343 HH5271 5
HC5374 HH5272 5.5
COUNTER-ROTATING UP TO 600HP HC5343 HH5271 5
HC5374 HH5272 5.5

……………………………………………………………………………………………………………………………………………..

CYLINDER Part# HC5343

To establish whether or not this cylinder is suitable for your application, the following points should be considered:

1. Fore and aft alignment of cylinder. If not mounted in line, motors will have a different turning radius.
2. Distance between motors.
3. Distance of travel in tilt arc.
4. Horizontal alignment of cylinder.

……………………………………………………………………………………………………………………………………………..

TECHNICAL INFORMATION

Cylinder PART# HC5343

Cylinder PART# HC5374

- Seal Replacement Kit Part # HS5157
– Cylinder Volume 8.13 cu. in. (133.2cc)
– Cylinder Stroke 10″
– Fittings 3/8″ compression
– Threads 9/16″ x 24 extra fine

SeaStar Outboard (Front Mount)


Part# HC5345, HC5347, HC5348

Applications
• General purpose system
• Single and multiple engine capability
• Total power to 700 HP
• Typical applications include center console fishboats and cruisers

Features
• Independent engine tilt for twin engine installations
• Easy steering
• 5 turns lock to lock steering response

……………………………………………………………………………………………………………………………………………

How To Select A Front Mount Outboard Steering System
300HP+ Outboard Installation Recommendations
Order Guide
Application Guide – Single Engine Applications
Application Guide – Twin Engine Applications
Cylinder Installation
Liquid Tie Bar Kit

back to top……………………………………………………………………………………………………………………………….

HOW TO SELECT A FRONT MOUNT OUTBOARD STEERING SYSTEM

1. From the order guide below select the system configuration based on:
a) the number of engines, and
b) the total engine power to be installed.
2. From the application guide below confirm that the Front Mount Cylinder will fit your specific make, model, and year of engine. Select the adapter kit for single engines or the tie bar kit for dual engines.
3. From the order guide select the appropriate helms and accessory hardware for each steering station.
4. From the order guide select the fitting and hose kits required for the installation. Note: for hoses add the distance required, in feet to the last two digits of the part number.
5. Confirm that there is sufficient space available in the splashwell and dash areas for the steering components. See WARNING.

Notes
Not recommended for use in installations where:
a) chopper, cleaver or surface piercing propellers are used,
b) the engine is highly elevated on the transom,
c) engine trim tabs have been removed,
d) the boat speed exceeds 75 mph (120 km/h), or
e) the power exceeds maximum Coast Guard or M.O.T. recommendations for the boat.

WARNING.
Operational interference of the steering cylinder/cylinder fittings and jackplates/transom/splashwell can occur under certain conditions. Check installation thoroughly throughout the full range of Motor Tilt, Jack Height and Trim before making final installation.

back to top……………………………………………………………………………………………………………………………….

300HP+ OUTBOARD INSTALLATION RECOMENDATIONS

With the introduction of heavier, higher horsepower engines producing more torque, Teleflex Marine has updated its recommendations across various applications (single and multiple engines, different hull types, etc.) Please read carefully to ensure that your current steering system provides the best comfort versus performance available.

ENGINE SEASTAR FRONT MOUNT
(Normal Use)
SEASTAR FRONT MOUNT
(Aggressive Use – See Note 1)
HYNAUTIC K-6
(Normal Use Only)
Single Engine SINGLE CYLINDER
350HP Max
75 MPH Max
HC53xx Cylinder (See Note 2)
SINGLE CYLINDER
350HP Max
HC53xx Cylinder (See Note 2 & 3)
SINGLE CYLINDER
300HP Max
55 MPH Max
Dual Engine
Non-Counter
Rotating
SINGLE CYLINDER
450HP Max, 55 MPH Max
HC53xx Cylinder, HO60xx Tiebar
SINGLE CYLINDER
Not Recommended
SINGLE CYLINDER
400HP Max
55 MPH Max
DUAL CYLINDER
600HP Max, 55 MPH Max
HC53xx Cylinders, HO60xx Tiebar
DUAL CYLINDER
700HP Max
HC67xx Cylinders (See Note 2 & 4)
HO67xx Tiebar
DUAL CYLINDER
500HP Max
55 MPH Max
Dual Engine
Counter
Rotating
SINGLE CYLINDER
600HP Max, 55 MPH Max
HC53xx Cylinder, HO60xx Tiebar
SINGLE CYLINDER
Not Recommended
SINGLE CYLINDER
400HP Max
55 MPH Max
DUAL CYLINDER
600HP Max, 55 MPH Max
HC53xx Cylinders, HO60xx Tiebar
DUAL CYLINDER
700HP Max
HC67xx Cylinders (See Note 2 & 4)
HO67xx Tiebar
DUAL CYLINDER
500HP Max
55 MPH Max
Triple Engine
One With
Counter
Rotating
DUAL CYLINDER
900HP Max, 55 MPH Max
HC53xx Cylinders, HO60xx Tiebar
DUAL CYLINDER
1050HP Max
HC67xx Cylinders (See Note 2 & 4)
HO67xx Tiebars
HA67xx Center Engine (See Note 2)
Bracket Kit
NOT
RECOMMENDED
TRIPLE CYLINDER
900HP Max, 55 MPH Max
HC53xx Cylinders, HO60xx Tiebar
TRIPLE CYLINDER
1050HP Max
HC67xx Cylinders (See Note 2 & 4)
HO67xx Tiebars
NOT
RECOMMENDED

Notes
1. Teleflex has specific steering equipment for boats that are driven aggressively, used in severe conditions or with more than 300 HP per engine.
2. ALL ENGINES over 300 HP and all boats that are driven aggressively must use a high strength tiller bolt, kit part #HA5822. All front mount cylinders built after June 15, 2007 will have this high strength bolt included in the box.High strength tiller bolts can be identified by the marking ‘TFX – ARP’ on the head of the bolt (refer to NOTICE below).
3. HC63xx PRO Cylinders are designed for all those critical high speed, single outboard engine boats, such as Bass, Flats combo Race/Ski and other performance orientated boats capable of speeds in excess of 65 mph. For optimal performance, the use of SeaStar PRO Kevlar Steering Hoses is recommended.
4. HC67xx Tournament cylinders are designed for use with high powered fishing/sport boats. If your application calls for dual or triple outboard engines, is capable of speeds exceeding 55 mp/h and runs ion open water, tournament Cylinders should be used.

back to top……………………………………………………………………………………………………………………………….

ORDER GUIDE

ENGINE/CYLINDER CONFIGURATION DESCRIPTION QTY. REQ. MODEL PART #
SINGLE ENGINE (Single Cylinder)
Applications up to 350HP Max.
Number of Turns = 5
Cylinder 1 Front Mount HC5345
Helm 1 SeaStar I–Standard* HH5271
Hose Kit 1 Outboard Hose HO51__
Oil 3 SeaStar Oil HA5430
For Extra Steering Station Add:
Helm 1 SeaStar I–Standard* HH5271
Fitting Kit 1 Add a Station HF5501
Hose Kit 1 Outboard Hose HO51__
Oil 1 SeaStar Oil HA5430
DUAL ENGINE (Single Cylinder)
Non-Counter Rotating Applications up to 450HP Max.
Counter Rotating Applications up to 700HP Max. Number of Turns = 5
CAUTION
Tournament cylinders required for agressisve use.
Cylinder 1 Front Mount HC5345
Tie-Bar Kit 1 HO60__
Helm 1 SeaStar I–Standard* HH5271
Hose Kit 1 Outboard Hose HO51__
Oil 3 SeaStar Oil HA5430
For Extra Steering Station Add:
Helm 1 SeaStar I–Standard* HH5271
Fitting Kit 1 Add a Station HF5501
Hose Kit 1 Outboard Hose HO51__
Oil 1 SeaStar Oil HA5430
DUAL ENGINE (Dual Cylinder)
Non-Counter Rotating Applications up to 700HP Max.
All Counter Rotating Applications
Number of Turns = 7

CAUTION
Tournament cylinders required for agressisve use.
Cylinder 2 Front Mount HC5345
Tie-Bar Kit 2 HO60__
Helm 1 SeaStar II–Standard** HH5272
Hose Kit 1 Outboard Hose HO51__
Hose Kit 1 Outboard Hose HO51__
Hose Kit 1 Outboard Hose HO51__
Fitting Kit 1 Tee Fittings HF5530
Oil 3 SeaStar Oil HA5430
For Extra Steering Station Add:
Helm 1 SeaStar II–Standard** HH5272
Fitting Kit 1 Add a Station HF5501
Hose Kit 1 Outboard Hose HO51__
Oil 1 SeaStar Oil HA5430
OPTIONAL EQUIPMENT Back Plate Kit (for use with Standard Helms) HA5478
20 Degree Wedge (for use with Standard Helms) HA5419
Autopilot Fitting Kit (for use with all Helms) HF5501
* Tilt Helm-SeaStar I HH5741
* Sport Tilt Helm-SeaStar I HH5291
* Rear Mount Helm-SeaStar I HH5261
** Tilt Helm-SeaStar II HH5742
** Sport Tilt Helm-SeaStar II HH5292
** Rear Mount Helm-SeaStar II HH5262

back to top……………………………………………………………………………………………………………………………….

APPLICATION GUIDE – Single Engine Applications

If your engine’s Horsepower rating is 300+, please refer to our 300HP + Outboard Installation Recommendations prior to selecting a cylinder from this application guide to ensure that you are selecting the correct cylinder for your engine/boat.

ENGINE MANUF. YEAR MODEL CYLINDER NOTES
Force 1985 TO DATE 90-150HP HC5345
Honda 1996 TO DATE 75-90HP HC5345
1998 TO 2009 115-130HP HC5347
1998 TO DATE 30-50HP HC5345 See Note 1
2001 TO DATE 135-225HP 4-STROKE HC5345
2003 TO DATE BF135HP HC5345
2010 TO DATE 115HP HC5345
Johnson / Evinrude 1977 TO 1990 65-300HP HC5348
1988 TO 1997 250-300HP V8 HC5342
1991 TO DATE 40-250HP HC5345 Inc. ETech Engines
1996 TO DATE 75-250HP FICHT HC5345
1998 TO DATE 40-140HP 4-STROKE HC5358 See Note 1
2000 TO DATE 115HP FICT HC5358 See Note 1
2002 TO DATE 200-225HP 4-STROKE HC5345
2005 TO DATE E250 DPX VINDICATOR HC5348
Mercury 1984 TO 1994E 2.4/2.5HP EFI HC5345 See Note 2
1989 TO DATE 75-300HP HC5345
1996 TO DATE 75-225HP 4-STROKE HC5345
1998 TO DATE 30-60HP HC5345 See Note 1
2003 TO DATE 250-300HP XS HC6345 See Note 3
Nissan 1990 TO DATE 90-140HP HC5345
Suzuki 1986 TO DATE 100HP HC5345
1986 TO 2002 115-140HP HC5345 NOT 1996
1986 TO DATE 150-300HP 2 & 4 STROKE HC5345
1996 ONLY 115-140HP HC5348
1998 TO DATE 40-140HP 4-STROKE HC5358 See Note 1
2003 TO DATE 90HP 4-STROKE HC5358 See Note 1
US Marine 1996 TO DATE 90-120HP HC5345
Yamaha 1990 TO 2003 40-90HP HC5345
1986 TO DATE 100-250HP 2-STROKE HC5345 See Note 5
1997 TO DATE 80-225HP 4-STROKE HC5345 See Note 5
2000 TO DATE 150-250 HPDI HC5345
2002 TO DATE 300 HPDI HC5358
2003 TO DATE 25-60HP 4-STROKE HC5348 See Note 1
2007 TO DATE F300–F350 HC5345 See Note 4
2010 TO DATE 70HP 4-STROKE HC5348
Yanmar 1994 TO DATE 90-120HP HC5345

Notes:
1. Requires kit HO5090.
2. May require extensive cowling modifications.
3. MUST use High Strength Tiller bolt, part # HA5822. Refer to the Notice below identifying the high strength bolt.
4. Optional cylinder part # HC5358. Slight interference may occur when using the HC5358, with the engine in the full tilt position.
5. Cylinder part # HC5358 may also be used in these single engine applications.

Notice

High Strength Tiller bolt, part# HA5822. ALL cylinders shipped after June 1st, 2007 will have this bolt included in the cylinder package.

back to top……………………………………………………………………………………………………………………………….

APPLICATION GUIDE – Twin Engine Applications

If your engine’s Horsepower rating is 300+, please refer to our 300HP + Outboard Installation Recommendations prior to selecting a cylinder from this application guide to ensure that you are selecting the correct cylinder for your engine/boat.

ENGINE MANUF. YEAR MODEL CYLINDER TIE BAR KITS NOTES
Twin Engine Single Cyl. Twin Engine Dual Cyl.
Force 1985 TO DATE 90-150HP HC5345 HO5008A HO5008A
Honda 1996 TO DATE 75-90HP HC5345 HO6001 HO6002 See Note 3
1998 TO 2009 115-130HP HC5347 HO5063 HO5064 See Note 5
1998 TO DATE 30-50HP HC5345 HO6001 HO6002 See Note 2
2001 TO DATE 150HP 4-STROKE HC5345 N/A HO6002 See Note 7
2001 TO DATE 225HP 4-STROKE HC5345 HO6001 HO6002
2003 TO DATE BF135HP HC5345 HO6003 HO6002
2010 TO DATE 115HP HC5345 HO6003 HO6002 See Note 7
Johnson / Evinrude 1977 TO 1990E 65-300HP HC5348 HO6003 HO6002
1988 TO 1997 250-300HP V8 HC5342 HO5001A HO5030 See Note 5
1991 TO DATE 40-250HP HC5345 HO6003 HO6002 Inc. ETech
1996 TO DATE 75-250HP FICHT HC5345 HO6003 HO6002
1998 TO DATE 40-140HP 4-STROKE HC5358 HO6003 HO6002 See Note 2
2000 TO DATE 115HP FICT HC5358 HO6003 HO6002 See Note 2
2002 TO DATE 200-225HP 4-STROKE HC5345 HO6003 HO6002
2005 TO DATE E250 DPX VINDICATOR HC5348 HO6003 HO6002
Mercury 1984 TO 1994 2.4/2.5HP EFI HC5345 HO6001 HO6002 See Note 4
1989 TO DATE 75-300HP HC5345 HO6001 HO6002 See Note 3
1996 TO DATE 75-200HP 2 & 4-STROKE HC5345 HO6001 HO6002
1998 TO DATE 30-60HP HC5345 HO6001 HO6002 See Note 2
2002 TO DATE 225HP 4-STROKE HC5358 HO6001 HO6002 See Note 1
2003 TO DATE 250-300HP XS HC5345 N/A HO6002 See Note 6
Nissan 1990 TO DATE 90-140HP HC5345 HO6001 HO6002
Suzuki 1986 TO DATE 100HP HC5345 HO6003 HO6002
1986 TO 2002 115-140HP HC5345 HO6001 HO6002 NOT 1996
1986 TO DATE 150-300HP 2 & 4 STROKE HC5345 HO6003 HO6002
1996 ONLY 115-140HP HC5348 HO6001 HO6002
1998 TO DATE 40-140HP 4-STROKE HC5358 HO6003 HO6002 See Note 2
2003 TO DATE 90HP 4-STROKE HC5358 HO6003 HO6002 See Note 2
US Marine 1996 TO DATE 90-120HP HC5345 HO6001 HO6002
Yamaha 1990 TO DATE 40-90HP HC5345 HO6003 HO6002
1986 TO DATE 100-250HP 2-STROKE HC5345 HO6001 HO6002
1997 TO DATE 80-225HP 4-STROKE HC5358 HO6001 HO6002 See Note 1
2000 TO DATE 150-250 HPDI HC5358 HO6001 HO6002 See Note 1
2002 TO DATE 300 HPDI HC5358 HO6001 HO6002
2003 TO DATE 25-60HP 4-STROKE HC5348 HO6003 HO6002 See Note 2
2010 TO DATE 70HP 4-STROKE HC5348 HO6003 HO6002
2006 TO DATE F300–F350 MUST use Tornament Cylinders
Yanmar 1994 TO DATE 90-120HP HC5345 HO6001 HO6002

Notes:
1. HC5345 is optional for SINGLE Engine ONLY applications. DO NOT use HC5345 for Twin engine applications as operational interference may occur.
2. Requires kit HO5090.
3. Minimum engine center = 27″.
4. May require extensive cowling modifications.
5. HO5030 and HO5064 comes without tie-bar.
6. One cylinder per engine. Must use Mercury supplied tiller bolt for installation.
7. Interference will occur when using a single HC5345 cylinder and HO6003 tiebar when installed in the aft hole on the steering arm.
Options include,
a) install tiebar into most forward hole (this will limit steering articulation),
b) purchase K-6 Cylinder, and tiebar kit part # HO5009. There will no be no interference when using twin HC5345 cylinders.

back to top……………………………………………………………………………………………………………………………….

CYLINDER INSTALLATION

WARNING.
Operational interference of the steering cylinder/cylinder fittings and jackplates/transom/splashwell can occur under certain conditions. Check installation thoroughly throughout the full range of Motor Tilt, Jack Height and Trim before making final installation.

If interference does occur, contact:

Teleflex Canada for additional information/options.
Telephone: (604) 270-6899 or (941) 488-6744
If interference is not eliminated total steering loss can occur, causing property damage and/or personal injury.

back to top……………………………………………………………………………………………………………………………….

LIQUID TIE BAR KIT

Part # HA5471-2

The Cylinder Alignment Valve will allow for the periodic required realignment of two outboard motors or rudders that are linked together with a Hydraulic Tie Bar as opposed to a solid link or Mechanical Tie Bar. Generally found on Pontoon Boats and Catamarans. Teleflex recommends the use of a mechanical tie bar when possible. There is no true substitute for a mechanical connection. The ‘Liquid Tie Bar Valve’ will require re-alignment. The frequency of re-alignment is too difficult to predict here as several application specific variables need to be taken into consideration.

SeaStar Outboard (Side Mount)


Part# HC5345, HC5347, HC5348

Applications
• All engines with threaded tilt (steering) tubes complying with ABYC P17/ABYC P21//NMEA/BIA standards for mechanical steering.
• Cylinder attaches to the engine tilt tube as per ABYC/NMEA/BIA standard.
• Single and multiple outboard engine installations.
• Total power to 600 Hp in counter rotating application. (see order guide )
• Typical applications include center console fishboats and cruisers.

Features
• Ease of installation.
• Alternative to Front Mount Cylinder.
• Unbalanced cylinder with 4.8/5.7 turns lock to lock.
• Suitable for installation in shallow splashwells.
• Suitable for use on engines fitted with power steering.

……………………………………………………………………………………………………………………………….

How To Select A Side Mount Outboard Steering System
Order Guide

back to top……………………………………………………………………………………………………………………………….

HOW TO SELECT A SIDE MOUNT OUTBOARD STEERING SYSTEM

1. From the order guide below select the system configuration based on;
a) the number of engines, and
b) the total engine power to be installed.
2. From the order guide select the cylinder(s) and tie bar kits required.
3. From the order guide select the appropriate helms and accessory hardware for each steering station.
4. From the order guide select the fitting and hose kits required for the installation.
5. Confirm that there is sufficient space available in the splashwell and dash areas for the steering components.

Notice
Not recommended for use in installations where:
a) chopper, cleaver, or surfacing piercing propellers are used,
b) the engine is highly elevated on the transom,
c) engine trim tabs have been removed,
d) the boat speed exceeds 75 mph (120 km/h), or
e) the power exceeds maximum Coast Guard or M.O.T. recommendations for the boat.

WARNING.
Not for use with SeaStar Pro Helm Pumps.

back to top……………………………………………………………………………………………………………………………….

ORDER GUIDE

ENGINE/CYLINDER CONFIGURATION DESCRIPTION QTY REQ. MODEL PART#
SINGLE ENGINE (Single Cylinder)
Applications up to 300HP Max.
Number of Turns = 4.8 / 5.7)
Cylinder 1 Side Mount HC5370
Helm 1 SeaStar I–Standard* HH5271
Hose Kit 1 Outboard Hose HO51__
Oil 3 SeaStar Oil HA5430
For Extra Steering Station Add:
Helm 1 SeaStar I–Standard* HH5271
Fitting Kit 1 Add a Station HF5501
Hose Kit 1 Outboard Hose HO51__
Oil 1 SeaStar Oil HA5430
DUAL ENGINE (Single Cylinder)
Non-Counter Rotating Applications up to 300HP Max.
Counter Rotating Applications up to
600HP Max.
Number of Turns = 4.8 / 5.7
Cylinder 1 Side Mount HC5370
Tie-Bar Kit 1 Tie-Bar Only HO5009
Helm 1 SeaStar I–Standard* HH5271
Hose Kit 1 Outboard Hose HO51__
Oil 3 SeaStar Oil HA5430
For Extra Steering Station Add:
Helm 1 SeaStar I–Standard* HH5271
Fitting Kit 1 Add a Station HF5501
Hose Kit 1 Outboard Hose HO51__
Oil 1 SeaStar Oil HA5430
DUAL ENGINE (Dual Cylinder)
Non-Counter Rotating Applications up to 600HP Max.
All Counter Rotating Applications
Number of Turns = 7.5
Cylinder 2 Side Mount HC5370
Tie-Bar Kit 1 Tie-Bar Only HO5009
Helm 1 SeaStar II–Standard ** HH5272
Hose Kit 1 Outboard Hose HO51__
Hose Kit 1 Outboard Hose HO51__
Hose Kit 1 Outboard Hose HO51__
Fitting Kit 1 Tee Fittings HF5530
Oil 3 SeaStar Oil HA5430
For Extra Steering Station Add:
Helm 1 SeaStar II–Standard** HH5272
Fitting Kit 1 Add a Station HF5501
Hose Kit 1 Outboard Hose HO51__
Oil 1 SeaStar Oil HA5430
OPTIONAL EQUIPMENT Back Plate Kit (for use with Standard Helms) HA5418
20 Degree Wedge (for use with Standard Helms) HA5419
Autopilot Fitting Kit (for use with all Helms) HF5501
*Tilt Helm-SeaStar I HH5741
* Sport Tilt Helm-SeaStar I HH5291
*Rear Mount Helm-SeaStar I HH5261
**Tilt Helm-SeaStar II HH5742
**Sport Tilt Helm-SeaStar II HH5292
**Rear Mount Helm-SeaStar II HH5262

SeaStar Outboard (Splashwell Mount)


Part # HC5380

Applications
• Single & multiple engine capability
• Total power to 600 Hp in counter rotating application.
• Transom or hull mounted cylinder.
• Speeds to 60 mph maximum (97 km/h).

Features
• Light duty alternative to front & side mount cylinders
• Unbalanced cylinder with 5.5/6.5 turns lock to lock
• Fits engines with/without support (steering) tube.

……………………………………………………………………………………………………………………………….

How To Select A Splashwell Mount Outboard Steering System
Order Guiude

back to top……………………………………………………………………………………………………………………………….

HOW TO SELECT A SPLASHWELL MOUNT OUTBOARD STEERING SYSTEM

1. From the order guide below select the system configuration based on:
a) the number of engines, and
b) the total engine power to be installed.
2. Select the cylinder and tie bar kit required.
3. From the order guide select the appropriate helms and accessory hardware for each steering station.
4. From the order guide select the fitting and hose kits required. You will have to determine the configuration, length, number of hose and fitting kits required for the installation (see Hose section).
5. Confirm that there is sufficient space available in the splashwell and dash areas for the steering components.

Notice
Not recommended for use in installations where:
a) chopper, cleaver or surface piercing propellers are used,
b) the engine is highly elevated on the transom,
c) engine trim tabs have been removed,
d) the boat speed exceeds 60 mph (97 km/h), or
e) the power exceeds maximum Coast Guard or M.O.T. recommendations for the boat.

back to top……………………………………………………………………………………………………………………………….

ORDER GUIDE

The splashwell mount cylinder (part no. HC5380) can be used on all engines complying with ABYC P17/NMEA/BIA standards provided they have a threaded attachment hole (3/8″ – 24 UNF thread) in the steering arm.

Not suitable for use on engines fitted with factory power steering.

ENGINE/CYLINDER CONFIGURATION DESCRIPTION QTY. REQ. MODEL PART NO.
SINGLE ENGINE (Single Cylinder)
Applications up to 300HP Max.
Number of Turns = 5.5 / 6.5
Cylinder 1 Splashwell Mount HC5380
Helm 1 SeaStar I–Standard* HH5271
Hose Kit 1 Outboard Hose HO51__
Oil 3 SeaStar Oil HA5430
For Extra Steering Station Add:
Helm 1 SeaStar I–Standard* HH5271
Fitting Kit 1 Add a Station HF5501
Hose Kit 1 Outboard Hose HO51__
Oil 1 SeaStar Oil HA5430
DUAL ENGINE (Single Cylinder)
Non-Counter Rotating Applications up to 300HP Max.
Counter Rotating Applications up to
600HP Max.
Number of Turns = 5.6 / 6.5
Cylinder 1 Splashwell Mount HC5380
Tie-Bar Kit 1 Splashwell Mnt Tie Bar HO5010
Helm 1 SeaStar I–Standard* HH5271
Hose Kit 1 Outboard Hose HO51__
Oil 3 SeaStar Oil HA5430
For Extra Steering Station Add:
Helm 1 SeaStar I–Standard* HH5271
Fitting Kit 1 Add a Station HF5501
Fitting Kit 1 Outboard Hose HO51__
Oil 1 SeaStar Oil HA5430
OPTIONAL EQUIPMENT Back Plate Kit (for use with Standard Helms) HA5418
20 Degree Wedge (for use with Standard Helms) HA5419
Autopilot Fitting Kit (for use with all Helms) HF5501
*Tilt Helm-SeaStar I HH5741
*Sport Tilt Helm-SeaStar I HH5291
*Rear Mount Helm-SeaStar I HH5261

SeaStar Pro Outboard

INTRODUCTION
SeaStar PRO Outboard Steering systems are suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats capable of speeds in excess of 65mph. Before ordering it is necessary to determine the proper cylinder and helm pump for your application. See application guide below. All SeaStar PRO systems require the use of a SeaStar PRO helm and SeaStar PRO (1500psi) reinforced Kevlar hoses ONLY!

Applications
Seastar Pro is for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 65 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellors and jack plates.

Features
• Patented steering lock valves.
• Low friction hydraulic steering system.
• 4.25 turns from lock-to-lock.
• Compact helm has only a 4-7/16” footprint — needs only 3” dash hole (Tilt requires larger hole).
• Optional PRO Cylinders with longer shaft bushings and larger pivot bushings for an even more solid feel!
• Factory swaged hoses are Kevlarฎ reinforced.
• Packaged complete with helm, cylinder, fittings, oil, bleeder kit and detailed instructions.
• Standard 3/4” tapered steering shaft.
• Fast, easy installation.
• Meets A.B.Y.C. standards.
• Meets N.M.M.A. certification requirements.

…………………………………………………………………………………………………………………………………………….

Selection Guide
Application Guide
Order Guide
Helm Pumps
SeaStar Pro Lock Valve System

back to top……………………………………………………………………………………………………………………………….

SELECTION GUIDE

DESCRIPTION PART NO.
COMPLETE SYSTEMS
SeaStar PRO Steering Kit (with Hoses) HK73XXA
SeaStar PRO Steering Kit (no Hoses) HK7400A
COMPONENTS
SeaStar PRO 2.0 – Front Mount Helm HH5770
SeaStar PRO Hose Kit (2 hoses) HO57_ _
Pivot Mount Cylinder HC5345
SeaStar Oil (1 Quart) HA5430 (x2)
OPTIONS
SeaStar PRO 1.7 – Front Mount Helm HH5779
SeaStar PRO 2.0 – Sport Tilt Helm HH6190
SeaStar PRO 2.0 – Classic Tilt Helm HH6574
SeaStar PRO 2.4 – Front Mount HH5772
Power Assist, 15′ Harness PA1200-2
Pivot Mount Cylinder (Silver) HC53_ _SIL
Pivot Mt. Cylinder — PRO (Red) HC6345RED
SeaStar Round Bezel Kit HA5478
SeaStar Backplate Kit HA5418
SeaStar 20ฐ Dash Wedge Kit HA5419
PRO Bulkhead Hose Kit (2 hoses) HO82_ _
SERVICE ITEMS
SeaStar Oil (1 Gallon) HA5440
Helm Service Kit, Comes with wheel shaft nut, key, shaft seal & seal plate HP6032

back to top……………………………………………………………………………………………………………………………….

APPLICATION GUIDE

ENGINE MAKER / BRAND YEAR MODEL CYLINDER PART NO. NOTES
Force 1985-Date 90-150hp HC5345
Honda 1996-Date 150-300hp HC5345
Johnson / Evinrude 1977-1990 150-300hp N/A Contact Teleflex
2002-Date 150-250hp 4-Stroke HC5345
2003-Date 150-300hp Etech HC5345
2005-Date E250hp Vindicator N/A Contact Teleflex
Mercury / Mariner and XS Engines 1989-Date 150-300hp 2-Stroke, 4-Stroke and XS Engines HC5345 XS Engine Requires Mercury Supplied Tiller Bolt On Install
Suzuki 1986-Date 150-250hp 2-Stroke, 4-Stroke HC5345
Yamaha 1986-Date 150-250hp 2-Stroke, 4-Stroke HC5345
2002-Date 300hpdi HC5358

Notice
SeaStar PRO Steering Systems can not be used with an unbalanced steering cylinder.

back to top……………………………………………………………………………………………………………………………….

ORDER GUIDE

ENGINE / CYLINDER CONFIGURATION DESCRIPTION QTY. REQ. MODEL PART NO.
Single Engine
(Single Cylinder)
Applications Up To 300hp Max
Number Of Turns: 4.25
Cylinder (See Application Guide) 1 Pivot Front Mount HC_3__
Helm 1 SeaStar Pro HH5770
Hose Kit 1 SeaStar Pro Hose HO57__
Oil 3 SeaStar Oil (QT.) HA5430
Optional Equipment Back Plate Kit (Front Mount Helms) HA5418
20 Degree Wedge (Front Mount Helms) HA5419
Sport Tilt Helm SeaStar Pro HA6190
Classic Tilt Helm SeaStar Pro HA6574
Bulkhead Hose Kit SeaStar Pro Hose HO82__
Silver Cylinders HC53__SIL
Pro Cylinders (available in red, silver or traditional black) HC63__
Power Assist Pro Steering PA1315-2

Notes
• Do NOT use with unbalanced cylinder.
• SeaStar PRO is for single engine applications only.
• The recommendations shown above apply to factory stock outboards only. Modified installations may require a higher capacity steering system. (Cylinder volume / helm displacement = number of turns.) If in doubt, contact Teleflex Canada technical service for assistance.
• Some applications vary from what is depicted in this catalog. Always consult SeaStar manual for diagrams specific to your application.
• Interference between the cylinder and boat can occur under certain conditions. Check installation thoroughly throughout the full range of movement for engine tilt and trim (and jack plate, if present).
• For all Seastar PRO outboard systems: use only SeaStar PRO Hose Kit Part No. HO57_ _ or HO82_ _, where last two digits equal length in feet.

back to top……………………………………………………………………………………………………………………………….

HELM PUMPS

SeaStar PRO Steering systems have the option to install a standard front mounting helm, both traditional and sport tilt as well as rear mount helm pumps. Please refer to page 9-1 for style and page 9-5 for PRO Helm part numbers.

CAUTION
SeaStar PRO Helms require the use of SeaStar PRO (1500 psi) Kevlar steering hoses

back to top……………………………………………………………………………………………………………………………….

SEASTAR PRO LOCK VALVE SYSTEM

SeaStar PRO’s unique valve system keeps pressures in the two hydraulic lines about equal, so the wheel feels solid and sure at all times.

SeaStar PRO is the only hydraulic steering system uniquely designed to give you maximum steering comfort and control of your high-performance bass boat.

SeaStar PRO has been installed on premium bass boats as original equipment for many years. It’s the ideal upgrade for twin-cable mechanical steering.

SeaStar SmartStick

INTRODUCTION
SmartStick is a non-contact autopilot position sensor that mounts to Teleflex outboard front mount cylinders (HC5345, HC5358*). The new SmartStick models replace the previous generation AR4102 and AR4202 models. There are three new SmartStick models available.

Features
• Non-contact sensing – no moving parts to wear
• Convenient installation – no linkages or external parts to mount
• Electrical components sealed in potting – corrosion resistant

……………………………………………………………………………………………………………………………………………..

SMARTSTICK ENHANCEMENTS INCLUDE

• No external black box – electronics integrated into sensor body, making cable easy to route through rigging with no splicing
• 35’ of cable can be trimmed to any length and jacket is labelled
• Digital Electronics are more immune to electromagnetic interference (EMI) – cleaner signal allows autopilot to perform better
• Installation of sensor is more convenient and faster
• Part Numbers are autopilot specific, no jumpers to cut
• Lower cost

*HC5358 must be installed on Yamaha and Evinrude engines with AR4502 series SmartSticks to ensure adequate clearance. Installing AR4502 series with HC5345 on Yamaha and Evinrude outboards may result in interference between the sensor and the cylinder.

back to top……………………………………………………………………………………………………………………………….

SPECIFICATIONS

AR4502 SERIES SPECIFICATIIONS
Range 8.0”
Resolution 0.012”
Linearity 0.048”
Repeatability 0.024”
Environmental Resitstance - Salt Spray 1000 hours
- IEC IP67 (Submersible to 1m)
- Immune to dirt, oil, SAE Fluids
- Thermal Shock and Vibration
Resistant (MIL-STD810F)

back to top……………………………………………………………………………………………………………………………….

ORDER GUIDE

MODEL AUTOPILOT OUTPUT
AR4502RM Ray Marine Installations Only 2.2V to 2.8V
AR4502SI SimRad Installations Only 2.8kHz to 4.0kHz
AR4502 Generic 0.5V to 4.5V

SeaStar Tournament Series Cylinder and Adjustable Tie Bar


Extreme heavy duty cylinders and tiebars designed for primarily high performance multiple engine applications. Also available for single engine applications.

……………………………………………………………………………………………………………………………………………..

SELECTING YOUR ENGINE CONFIGURATION

The SeaStar Tournament Tie Bar is suitable for any number of engine configurations. Our engine configuration selection tool allows you to choose your layout with confidence, knowing the right components required.

Select Your Engine Configuration

……………………………………………………………………………………………………………………………………………..

ORDER GUIDE

CONFIGURATION CYLINDER HARDWARE KIT TIE BAR NOTES
PART NO. QTY. PART NO. QTY. PART NO. QTY. CENTER TO CENTER DISTANCE (IN.) CENTER TO CENTER DISTANCE (MM.)
Single Engine HC6845S 1 Included N/A N/A N/A See Note 1
Twin Engine – Single Cylinder (STBD) HC6845 1 HA6802 1 HO6821 1 25.0 – 25.6 635 – 650 See notes 1,3,4,5 HA6802 Drive Bracket Availability – TBD
HO6822 25.7 – 30.6 653 – 777
HO6823 30.7 – 39.0 780 – 991
Twin Engine – Dual Cylinder HC6845 2 HA6804 1 HO6820 1 25.0 – 26.5 635 – 673 See notes 1,3,4,5
HO6821 26.6 – 29.3 676 – 744
HO6822 29.4 – 34.2 747 – 869
HO6823 34.3 – 43.0 871 – 1092
Triple Engine – Dual Cylinder HC6845 2 HA6806 1 HO6822 2 25.0 – 27.9 635 – 709 Maximum drop: ≤ 3 inches (76mm) See notes 1 thru 5
HO6823 28.0 – 36.0 711 – 914
Quad Engine – Dual Cylinder HC6845 2 HA6811 1 CONSULT TELEFLEX TECHNICAL SERVICE See notes 1,3,4,5
Quintuplet Engine (Plus) CONSULT TELEFLEX TECHNICAL SERVICE
  1. See notes 1,3,4,5

Important Information:
Each configuration requires a hardware kit and tie bar kit(s), with the exception of the single engine configuration.

GENERAL INSTALLATION NOTES FOR CHART ABOVE

1) Installation may vary according to the following factors: engine mounting height, transom thickness, use of transom savers, tiller bolt hole location, engine tilt range, and engine size.

2) For center engine drops greater than 3 inches (76mm), please consult Teleflex Technical Service.

3) Tie bar length may vary depending on toe in/toe out setup. To allow for toe, add or subtract from your nominal engine center to center distance.

4) Based on recommended engine manufacturer minimum center to center distances. Deviating from these recommendations may require stroke limiting cylinders and/or engine tilt limiting, please consult Teleflex Technical Service.

5) Cylinder’s must be plumbed in parallel only, no series connections. Only exception is if cylinders are utilizing a liquid tie bar.