STANDARD EQUIPMENT

• Circuit breaker/isolator panel (supplied with DC units only)
   
• Footswitch (supplied with DC units only)
   
• Chainpipe and chainwheel
   
• Emergency crank handle (Except on HWC650)

OPTIONS

• Additional footswitches
   
• Dual direction solenoid pack
   
• Up/down remote control panel
   
• AutoAnchor 500C Chain Counter
   
• Hydraulic motor
   
• Traditional bronze finish (chainwheel & capstan)
   
• Chain Stopper*
   
• Vertical warping drum featuring MAX-grip™ for independent rope hauling from any direction (HWVC3500 only)
   
• Larger horizontal windlass with capstan available (Refer Maxwell Superyacht catalogue)

FEATURES
• Fully automatic single, or dual direction operation.
• 'MAX-grip? warping drum for independent rope hauling only.
• Optional dual anchor handling with smooth independent control of each chainwheel via cone clutches.
• Chainpipe and stripper included.
• Cone-type brake/clutch mechanism permits manual 'free-fall' anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement ensuring safe and precise operator control.
• Chainwheel locking pawl.
• Simple deck mounted installation with no under deck parts.
• Simplified maintenance with ability to strip the running gear (chainwheel and capstan drum) from the winch without disturbing the winch mounting.
• Heavy duty, dual-direction electric motors. Isolated ground type with durable class F insulation throughout motor.
• The gearbox has a high-efficiency output drive with heavy-duty wide-face, precision, bronze spur gears in a sealed oil bath. It is removable as a sealed unit for servicing. (Specifications differ depending on motor and winch rating).
• Chainwheel and warping drum of high-quality chrome finish over marine-grade alloy bronze.
• Marine-grade pretreated alloy casing, powder coated and finished with a two component white polyurethane paint. Important: Maxwell windlasses must be used in conjunction with a chain stopper or snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system can also be used to secure the anchor in the fully raised position while under way.

SPECIFICATIONS

Model	650	1200	2200	3500	HWVC3500
Maximum Pull	295kg	545kg	1000kg	1590kg	1590kg
	650 lbs	1200 lbs	2200 lbs	3500 lbs	3500 lbs
Line Speed	20m/min	17m/min	17m/min	10m/min	10m/min
(Normal Working)	65ft/min	56ft/min	56ft/min	33ft/min	33ft/min
Power Supply (DC)	12 or 24V	12 or 24V	12 or 24V	12 or 24V	12 or 24V
Motor (Watts)	1000w	1200w	1200w	1200w	1200w
Hydraulic Pressure	N/A	138BAR	124BAR	138BAR	138BAR
	N/A	2000PSI	1800PSI	2000PSI	2000PSI
Hydraulic Flow	N/A	20 l/min	36 l/min	32 l/min	32 l/min
	N/A	5.3 US gal	9.5 US gal	8.5 US gal	8.5 US gal
Chain Sizes	6-8mm	6-10mm	8-11mm	10-13mm	10-13mm
(Short Link)	1/4"- 5/16"	1/4"- 3/8"	5/16"- 7/16"	3/8"- 1/2"	3/8"- 1/2"
Net Weight - DC	16kg	24kg	41kg	48kg	94.5kg
	35 lbs	52 lbs	91 lbs	106 lbs	208 lbs
Net Weight - Hyd	N/A	17kg	35kg	40kg	80kg
	N/A	37 lbs	76 lbs	88 lbs	176 lbs

DIMENSIONS

MODEL	650	1200	2200	3500	HWVC3500
A	345mm	390mm	475mm	515mm	515mm
	13 19/32"	15 3/8"	18 11/16"	20 9/32"	20 9/32"
B	190mm	205mm	289mm	316mm	316mm
	7 15/32"	8 1/16"	11 3/8"	12 7/16"	12 7/16"
C	300mm	420mm	516mm	549mm	701mm
	11 13/16"	16 17/32"	20 5/16"	21 5/8"	27 5/8"
D (Hole centres)	125mm	210mm	230mm	260mm	417mm
	4 15/16"	8 9/32"	9 1/16"	10 1/4"	18 7/16"
E	N/A	N/A	N/A	N/A	442mm
	N/A	N/A	N/A	N/A	17 7/16"
F (Hole centres)	132mm	225mm	278mm	308mm	464mm
	5 3/16"	8 7/8"	10 15/16"	12 1/8"	18 1/4"
G (Hole centres)	150mm	260mm	300mm	348mm	348mm
	5 29/32"	10 1/4"	11 13/16"	13 11/16"	13 11/16"
H (Working height of drum for rope warping)	37.5mm	69mm	60mm	53mm	53mm
	1 15/32"	2 3/4"	2 3/8"	2 3/32"	2 3/32"
I	69mm	95mm	125mm	130mm	130mm
	2 3/4"	3 3/4"	4 15/16"	5 1/8"	5 1/8"
J	107mm	151mm	194mm	208mm	287mm
	4 4/32"	5 15/16"	7 5/8"	8 3/16"	11 19/64"