Marine Electronics | Boat Part | fishfinder

Home > Electrical Supply > DC Voltage Converters >

ANALYTICAL VTC-305-1224 12-24V CONVERTER (29098)

List Price: US$799.00
Our Price: US$579.00
You Save US$220.00!

Availability: Usually ships the next business day
Product Code: ANLVTC3051224

Description

DESCRIPTION

Step up a 12 VDC battery to between 13.5 and 17.0 or 24.0 and 27.5 VDC in 0.5 VDC increments (via 3 position DIP switch), or stabilize a 12 or 24 VDC power system.

Safety features include reverse input protection, low input voltage alarm, low output voltage alarm, over temperature shutdown and alarm, a dry contact alarm relay output and output overvoltage crowbar. If the input voltage exceeds the regulated output voltage, the unit simply passes the voltage through with full LC filtering and a single schottky diode drop (0.5 VDC or less). Optional features include remote panel monitoring with On/Off control.

Applications include temporarily brightening 12 volt headlights or work lights, increasing voltage into an automotive or marine ignition system for hotter spark and/or prevention of failures due to voltage drop during engine start, stabilizing 12V and 24 VDC power systems in marine, automotive or aeronautical environments and more.

FEATURES

Vibration proof output voltage adjustment by 3 position DIP switch
Audible & visual indicators for constant current, low input voltage, low output voltage & over-temperature
Extremely rugged and well suited for marine and other demanding environments
High tolerance for shock and vibration
Ultra-quiet low EMI operation
Current limiting protection
Output over-voltage crowbar
Reverse input protection
Dry contact output fail relay
Wide operating temperature range (-25�DC to +40�DC)
3 year parts and labour warranty

VTC305 Detailed Specifications

MODEL	VTC305-12-12	VTC305-12-24
Electrical (Input)
Input Volts (DC)	10.5 - 18	10.5 - 28
Input Amps (max)	30
Input Fuse	AGC 20 x 2 Amp
Noise on Input	< 25mV
Low Input Voltage Alarm	10.5 VDC
Current Limit	30 Amps in
Electrical (Output)
Output Nominal (op)	12	24
Output Volts (DC)	Input - 1V or 13.5 to 17.0 Whichever is greater	Input - 1V or 24.0 to 27.5 Whichever is greater
Output Amps	�� 27
Output Crowbar	Programmed Output Volts x 1.2
Output Ripple & Noise	< 25mV
Low Output Voltage Alarm	Programmed Output Voltage minus 2.5 VDC
Transient Response	< 1V for 50% Surge
Regulation (Line & Load)	< +/- 0.5%
Duty Cycle	Peak 20% for 5 min max Continuous 100% for 24 hours per day
Efficiency	> 90% @ Maximum Output
Mechanical and Environmental
Operating Temperature Range	-25 to +40�DC @ Maximum Output Derate Linearly 2.5% per �DC from 40�DC (Optional -40�DC extra wide temperature operation avail.)
Humidity	0-95�DC Relative Humidity (non-condensing) with optional conformal coating
Audible Noise	NONE �ldb @ 3 feet
Typical Service Life	>10 years (87,600 hours)
Isolation	Any Input or Output to Case 500 VDC Input to Output �� Common Negative
Length	9.1 in / 23.1 cm
Width	7.8 in / 19.8 cm
Height	2.5 in / 6.4 cm
Clearance	1 Inch (2.5 cm) all around
Material	Marine Grade Aluminum
Finish	Black Powder Epoxy Coat
Fastenings	All 18-8 Stainless Steel
Weight	4.0 lb / 1.8 kg
Connections	Four contact output terminals
Warranty	3 years
Safety	Approval to CSA/UL Standards Pending
�� The actual output current capability depends upon the input/output voltage ratio. To obtain the actual output current capability at any given input voltage, use the following formula: Output Amps = Input Volts/Output Volts x 27 For example, at 11VDC in and 13.6 VDC out, the output current = 11/13.6 x 27 = 22.8 amps

Enhancements to these general specifications can be accommodated upon request
Designed to meet common approval requirements. Specifications Subject to Change Without Notice
Designed and Manufactured in Canada