Marine Electronics | Boat Part | fishfinder

Home > Electrical Supply > Battery Charger > DC/DC Battery Chargers >

ANALYTIC 13A, INPUT 10.5-28, 24V OUT, STEP-UP DC CHARGER

List Price: US$990.00
Our Price: US$825.00
You Save US$165.00!

Availability: Usually ships the next business day
Product Code: BCD305-12-24

Description

DESCRIPTION

The BCD305 battery charger provides up to 300 watts to charge a 12V or 24V battery system (1 or 2 banks) from a 12V source. Both the 12V source and the batteries under charge must share a common ground.

This all-new single board design incorporates state of the art switchmode technology for unmatched efficiency and ultra-quite operation. Multiple stages of filtering reduce radiated or conducted noise to very low levels. Extra features include adjustable output voltage, audible and visual indicators for low input voltage, low output voltage and over temperature.

Safety features include reverse input protection, over-temperature shutdown, current limiting, short circuit protection with automatic recovery, input undervoltage shutdown, reverse battery protection, a dry contact alarm relay and output overvoltage crowbar.

Applications include charging the compulsory battery on vessel's over 20 meters, temporarily brightening 12 volt headlights or work lights, increasing voltage into an automotive or marine ignition system for hotter spark and/or prevention of failures due to voltage drop during engine start, stabilizing 12V and 24 VDC power systems in marine, automotive or aeronautical environments and more.

Available options include a remote control and/or extra-wide temperature. We are confident that you will get many years of reliable service from this DC Battery Charger.

FEATURES

Adjustable output voltage for charging standard or deep cycle lead-acid, VRLA or Gel type batteries
Audible & visual indicators for constant current, low input voltage, low output voltage & over-temperature
Extremely rugged and well suited for marine and other demanding environments
High tolerance for shock and vibration
Ultra-quiet low EMI operation
Current limiting protection
Short circuit protection
Output over-voltage crowbar
Reverse input protection
Over temperature shutdown
Spark free connection
Can be left permanently connected
Dry contact output fail relay
Wide operating temperature range (-25�C to +40�C)
3 year parts and labour warranty

BCD305 DC/DC Battery Charger Detailed Specifications

MODEL	BCD305-12-12	BCD305-12-24
Electrical
Input Volts (DC)	10.5 - 14	10.5 - 28
Input Amps (max)	30
Output Volts (DC)	13.6 � 0.05 V	27.2 � 0.05 V
Charging Amps	� 26	� 13
Output Crowbar	16.0 � 0.5 V	32.0 � 1.0 V
Input Fuses	AGC 20 x 2 Amp
Output Fuses	AGC 30 Amp
Low Input Voltage Alarm	10.5 VDC
Low Output Voltage Alarm	Programmed Output Voltage minus 2.5 VDC
Battery Banks	1 or 2
Stages	2
Battery Size (Amp Hours)	104 - 156	52 - 78
Transient Response	< 1V for 15A Surge
Efficiency	> 85 % @ maximum output
Duty Cycle	Continuous 100% for 24 hours per day
Input Noise	< 10 mV
Output Ripple and Noise	< 10 mV
Regulation (Line & Load)	< +/- 0.5%
Mechanical and Environmental
Operating Temperature Range	-25� to +40�C @ Maximum Output Derate Linearly 2.5% per �C from 40�C (Optional -40�C wide temperative available)
Humidity	0-95�C Relative Humidity (non-condensing) with optional conformal coating
Audible Noise	NONE �db @ 3 feet
Typical Service Life	>10 years (87,600 hours)
Isolation	Any Input or Output to Case 500VDC Input to Output Common Negative
Length	9.1 in / 23.1 cm
Width	7.8 in / 19.8 cm
Height	2.5 in / 6.4 cm
Clearance	1 Inch (2.5 cm) all around
Material	Marine Grade Aluminum
Finish	Black Anodize / Powder Epoxy Coat
Fastenings	All 18-8 Stainless Steel
Weight	4.0 lb / 1.8 kg.
Connections	Four contact output terminal
Warranty	3 years
� The Actual charging rate depends upon the input/output voltage ratio. To obtain the charging capacity at any given input voltage, use the following formula: Charging Current = Input Volts/Output Volts x 26 For example, at 10.5VDC in and 13.6VDC out, the charging current = 11/13.6 x 26 = 21.0 amps

Enhancements to these general specifications can be accommodated upon request
Designed to meet common approval requirements. Specifications Subject to Change Without Notice
Designed and Manufactured in Canada