The BCD310 battery charger provides up to 300 watts to charge a 12 or 24 or 48 Volt battery system from a 110V, 220V or 300VDC source. The batteries must share a common ground but the source can be on a different positive or negative ground.

Multiple stages of filtering reduce radiated or conducted noise to very low levels. Extra features include adjustable output voltage, audible and visual indicators for low input voltage, low output voltage, over temperature and an equalize charging cycle.

Safety features include reverse input protection, over-temperature shutdown, current limiting, short circuit protection with automatic recovery, input undervoltage shutdown, reverse battery protection, output overvoltage crowbar and a dry contact alarm relay output.

Optional features include a Digital Volt/Ammeter, 3-Bank Charging, a Remote Control Panel, and/or a second Battery Temperature Sensor. We are confident that you will get many years of reliable service from this DC Battery Charger.

FEATURES

Fully Isolated Design
Transient Voltage Suppressor
Adjustable output voltage for charging standard or deep cycle lead-acid, VRLA or Gel cell type battery
Extremely rugged and well suited for marine and other demanding environments
High tolerance for shock and vibration
Ultra-quiet, low EMI operation
User selectable 2 or 3 stage charging profile
Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature
Over-temperature shutdown
Equalize Charge Mode and Temperature Compensation
Short circuit protection
Output over-voltage crowbar
Inrush current limiting with solid state bypass
Can be left permanently connected
Thermostatically controlled fan
Dry contact output fail relay
Wide operating temperature range (-25°C to +40°C)
3 year parts and labour warranty