Designed for power boat applications, the ST60+ Wind Rotavecta system provides accurate wind speed and direction information.  Wind speed is displayed in either knots, meters per second or as Beaufort scale values on the instruments high visibility LCD display.  Wind direction is indicated on the ST60+ wind's 360 degree apparent wind direction scale (0-180 degrees, port and starboard.)  Offering 3 levels of backlighting on the LCD and dial, as well as superior and contrast and visibility, the ST60+ Wind instrument can be easily seen day or night.  The instrument is constructed in a rugged, waterproof case to provide reliable performance, even under the most demanding conditions.
 

The ST60+ Wind instrument receives data from the unique Rotavecta wind transducer.  This design accurately calculates both speed and direction from a single rotating sensor.  Additional ST60+ Wind displays can be added as repeaters wherever needed simply by connecting them to the SeaTalk network and configuring them as repeaters.  The ST60+ Wind system can also be installed as a stand-alone device independent of other onboard systems.

In addition to basic speed and direction data, ST60+ Wind provides a wealth of information useful for sailing, racing, cruising and docking.  Wind speed and direction can be displayed as true or apparent (relative) data.  The system also calculates Velocity Made Good (VMG) when data from a SeaTalk compatible speed instrument is available.  The ST60+ Wind system (when installed as a master) has alarms for maximum/minimum true wind speed and minimum/maximum apparent wind angles.

Raymarine ST60+ instruments offer convenient and flexible mounting configurations.  Out-of-the box each ST60+ device can be attractively surface mounted right onto your console, dashboard or bulkhead.  Using the optional flush-mount kit (A25003-P) ST60+ instruments can be low-profile mounted, matching Raymarine C-Series, E-Series and G-Series multifunction and marine displays.  For installation on a table-top or from the overhead use the optional ST60+ bracket mounting kit (E25009.)

The ST60+ Rotavecta Wind System comes with display unit, sun cover, Rotavecta wind transducer, 30M masthead cable (98'), SeaTalk and power cables, surface mount kit and complete instructions.
 

ST60 Plus Wind System Rotavecta Specifications Additional Features   Opposite tack mode Yes SeaTalk heading required for Tack angle features.   Soft Power Down Yes     Adjustable Display Response Time LCD and pointer   Approvals   EMC (Europe and FCC) Yes     CE marked Yes   Connections   SeaTalk 2 connections     NMEA input and output (0183) option via E85001     PC (RS232) and RayTech interface option via E85001   Display Pages   Wind speed data apparent/true/max SeaTalk speed data required for true calculations.   Wind speed range (knots) (transducer dependant) 0 to 60kts     Wind angle data apparent/true SeaTalk speed data required for true calculations.   Wind angle range 180° port and starboard     Wind alarms high wind speed (high/low/max)     Wind units (wind only) knots/ms/Beaufort   Environmental   Operating temperature range -15°C to +55°C     Non-operating temperature range -25°C to +70°C     Humidity up to 95%     Waterproofing standard IPX6 & CFR46   Physical   Overall dimensions (WxHxD) mm (standard bezel) 110x115x39     Mounting methods flush/surface/bracket     Control type(s) 4 backlit buttons     Display size and type 34mm segmented LCD & pointer     Maximum character size 13mm     Display lighting 3 levels plus off   Power   Nominal voltage (volts DC) 12V systems     Absolute voltage range 10 – 16 volts     Power consumption (typical) mA 65mA