The ST60+ Rudder Angle Indicator System provides a continuously updated real time display of your vessel's rudder angle on a easy-to-read analog display. Offering 3 levels of backlighting on the dial, as well as superior contrast and visibility, the ST60+ Rudder Angle Indicator instrument can be easily seen day or night.  The instrument is constructed in a rugged, waterproof case to provide reliable performance, even under the most demanding conditions.
 

The ST60+ Rudder Angle Indicator Display receives rudder angle data either from a connected rudder reference transducer (master mode) or via SeaTalk networking from your Raymarine SeaTalk compatible autopilot system (repeater mode.)  Additional ST60+ Rudder Angle Indicator displays can be added wherever needed simply by connecting them to the SeaTalk network and configuring them as repeaters.  The ST60+ Rudder Angle Indicator system can also be installed as a stand-alone device independent of other onboard systems.

The ST60+ Runnder Angle Indicator is perfect for pilothouses, bridge wing control stations, aft docking stations and any other location where reliable rudder angle readout is required.  The color coded analog readout displays degree of rudder travel from 0º to 40º, port and starboard.
 

Raymarine ST60+ instruments offer convenient and flexible mounting configurations.  Out-of-the box each ST60+ device can be attractively surface mounted right onto your console, dashboard or bulkhead.  Using the optional flush-mount kit (A25003-P) ST60+ instruments can be low-profile mounted, matching Raymarine C-Series, E-Series and G-Series multifunction and marine displays.  For installation on a table-top or from the overhead use the optional ST60+ bracket mounting kit (E25009.)

The ST60+ Rudder Angle Indicator Display comes with display unit, sun cover, SeaTalk and power cables, surface mount kit and complete instructions.  To display rudder angle information  on the ST60+ Rudder Angle Indicator display you will need to integrate it with your SeaTalk compatible autopilot system, or add an optional rotary or linear rudder reference transducer.

ST60 Plus Rudder Display Specifications Additional Features   Soft' power down Yes     Adjustable pointer response Yes   Approvals   EMC (Europe and FCC) Yes     CE marked Yes   Connections   SeaTalk 2 connections     NMEA input and output (0183) option via E85001     PC (RS232) and RayTech interface option via E85001   Display Pages   Rudder angle indicator -40º to +40º Degrees   Environmental   Operating temperature range -15°C to +55°C     Non-operating temperature range -25°C to +70°C     Humidity up to 95%     Waterproofing standard IPX6 & CFR46   Physical   Overall dimensions (WxHxD) mm (standard bezel) 110x115x39     Mounting methods flush/surface/bracket     Control type(s) 4 backlit buttons     Display lighting 3 levels plus off   Power   Nominal voltage (volts DC) 12V systems     Absolute voltage range 10 – 16 volts     Power consumption (typical) mA 45mA