JRC JSS-296 MF/HF GMDSS SSB RADIO TELEPHONE

Home > Communication > SSB Radio >

List Price: US$25,999.00
Our Price: US$15,999.00
You Save US$10,000.00!

Availability: Usually ships the next business day
Product Code: JSS296

Description

♦

The JSS-296 MF/HF Radio Equipment is designed for vessels navigating A2,A3 and A4 sea areas. It consists of mainly the JSB-196GM Radiotelephone, NFC-296 Antenna Tuning Unit (ATU), NCT-196N DSC/NBDP MODEM, NDZ-127J Data Terminal Equipment (DTE), NDF-268 Keyboard, and NAH-692 Power Amplifier, and it provides the optimum GMDSS system for the superior performance, compact, lightweight and highly efficient design of the units, which ensures easy operation for distress and safety calling as well as general communications.

♦	Fully Complies with GMDSS Requirements
	All the functions required by IMO resolutions A.804 (19) and A.806 (19) are equipped, and suitable for radio installations of vessels navigating A2, A3 and A4 sea areas.

♦	Inadvertent Distress Alert Protection
	The DISTRESS button is protected by a cover to prevent inadvertent distress alert transmission.

♦	AC/DC Two-way Power Supply
	Ordinarily the Power Supply equipped in the NAH-692 Power Amplifier operates with AC mains and when AC mains is failed, it operates with auxiliary DC24V battery.

♦	Selfcheck Function
	A Built-in high grade selfcheck function centrally controlled using JSB-196GM Radiotelephone ensures easy maintenance.

♦	Built-in Dummy Load for ATU Selfcheck
	The dummy load for checking the NFC-296 Antenna Tuning Unit (ATU) is built-in and not required to connect as extra unit.

♦	Outdoor Installable Antenna Tuning Unit
	The NFC-296 Antenna Tuning Unit can be installed outdoors such as on deck, ensuring effectiveemission of transmitter power.

SPECIFICATION

� GENERAL
Frequency range	Transmit:1.6 to 27.5MHz (100Hz steps) Receive:0.1 to 29.9999MHz (100Hz steps)
Frequency tolerance	�10Hz or better
Emission mode	J3E (TEL),F1B (DSC/TLX),A1A (CW),H2B, H3E (AME:reception only)
User definable channels	200ch (20ch X 10 Groups)
Preset ITU channels	1722ch [ TEL:283,DSC:29,TLX:891,CW:519 ]
Scanning channel	20 user defined channels
Communication mode	Simplex and semi-duplex
Antenna impedance	50 ohms
Operating temperature	-15 to +55degC
Power requirement	90 to 132VAC/ 180 to 264VAC, Single-phase, 50/60Hz Tx:2.0kVA max, Rx:0.5kVA max 21.6 to31.2VDC Tx:30A max, Rx:7A max
Compass safe distance	1.5m
� TRANSMITTER
Output power	AC power source: 200Wpx (1.6 to 4MHz ),250Wpx (4 to 27.5MHz ) DC power source: 100Wpx (1.6 to 4MHz ),150Wpx (4 to 27.5MHz )
Occupied bandwidth	J3E(TEL) 3kHz or better F1B (DSC/TLX),A1A (CW)0.5kHz or better
� RECEIVER
Receiving system	Triple superheterodyne
Intermediate frequencies	70.455MHz, 455kHz, 20.217kHz
Sensitivity (SINAD 20dB)	J3E (TEL)6.3uV or better (1.6 to 4MHz) 3.5uV or better (4 to 27.5MHz) F1B (DSC/TLX)1.8uV or better (1.6 to 4MHz) 1.0uV or better (4 to 27.5MHz)
Selectivity	J3E (TEL)6dB bandwidth 2.4 to 3kHz, 66dB bandwidth Within �2.1kHz F1B (DSC/TLX)6dB bandwidth 270 to 300Hz, 60dB bandwidth Within �550Hz
Clarifier range	�200Hz in 1Hz steps
� WATCHKEEPING RECEIVER
Receiving frequencies	2187.5kHz, 4207.5kHz, 6312kHz, 8414.5kHz, 12577kHz, 16804.5kHz
Receiving system	Double superheterodyne
Intermediate frequencies	40.455MHz,455kHz
Reception mode	F1B/J2B
Sensitivity	Symbol error rate of 1%or better at 1 micro - volt input
Frequency stability	Within +/- 10Hz after 1 - minute warm - up
� DSC/NBDP TERMINAL DSC MODEM
Communications protocol	In conformity with ITU - RM.493 and M.541
Emission	F1B 100 baud
Memory capacity	Received Distress messages:20 Received Other messages:20 Transmitted message:11
Data backup time	24 hours (message content and time data)
� DSC/NBDP TERMINAL DSC MODEM
Communications protocol	In conformity with ITU-RM.476,M.490,M.491, M.492,M.625 and ITU-T Rec.F130
Emission	F1B 100 baud
� ANTENNA TUNER
Frequency range	1.6 to 30MHz
Power capability	300Wpx
Tuning method	Automatic tuning and preset tuning
Operating temperature	-25 to +55degC
� BATTERY CHARGER
Charging current	20A (Ordinary charge)
Alarm function	10A (Equalizing charge) Charge /Low voltage/ High voltage alarm
DATA TERMINAL
Controlled item	NBDP function (Control the DSC/NBDP Terminal)

♦ STANDARD COMPONENTS

Component	Model	Q'ty	Remark
MF/HF Radiotelephone	JSB-196GM	1
Included Accessories
Hand Set	7ZCJD0043	1	L=1m
Power Cable	7ZCJD0043A	1
Plug	5JCAS00029	1
Connecter	5JJAJ00034	2	14-8
Terminals	5JDAH00084	2	40A
Spare Fuse	5ZFEX00013	4	English
Instruction Manual	7ZPJD0124	1

Component	Model	Q'ty	Remark
DSC/NBDP MODEM	NCT-196N	1
Included Accessories
Power Cable	7ZCJD0139	1	L=3m
AF Cable	7ZCJD0071	1	L=1.5m
Control Cable	7ZCJD0072	1	L=1.5m
Terminals	5JTCD00220	2	1.25-8
Spare Fuse	5ZFCK00001	4	7.5A
Instruction Manual	7ZPJD0156	1	English