Raymarine Package Deal - C70, C80, E80, E120
The PS Inverter/Charger delivers dependable sine wave power at a mid-range price. This cost-effective inverter/charger also allows you to choose optional features that suit your needs and budget.
Description
The PS 2.5 kW inverter/charger is available in 12- and 24-volt models and includes a fully automatic three-stage battery charger.
Product Features
Options
PS2524
Electrical Specifications
AC input voltage
120 VAC
AC input voltage range (default)
108 - 132 VAC
AC input current (via slector switch)
30 or 50 amsp
Continuous Power @ 25°C
2500 VA
Efficiency (Peak)
92%
Output voltage (RMS)
Output voltage regulation (typical)
+/- 3%
Frequency (Nominal)
60 Hz
Continuous output @ 25°C
21 amps AC
Surge capability:
5 sec rating (resistive)
6000 watts
1 mSec
108 amps AC
100 mSec
75 amps AC
DC input voltage (Nominal)
24 VDC
DC input voltage range
22 - 33 VDC
DC current at rated power
140 amps DC
Idle consumption
< 20 watts
Search mode consumption
< 0.5 watts
Max. charge rate (adjustable)
65 amps DC
Total Harmonic Distortion
3 -5 % Stand alone operations
Waveform
Sine wave, 34 to 52 steps per cycle
Load Sensing (Inverter Mode)
Adjustable 0 to 240 watts (48 watts default)
Specified temperature range
32°F - 104°F (0°C - 40°C)
Enclosure type
Fully screened, indoor, ventilated, steel chassis with powdercoat finish
Unit weight
80 lb (36.4 kg)
Shipping
88 lb (40 kg)
Inverter dimensions (H x W x D)
15.5 x 22.5 x 6.5" (38.7 x 57.1 x 16.6 cm)
Shipping dimensions (H x W x D)
20 x 26 x 12.75" (51 x 66 x 32.3 cm)
Mounting
Vertical wall mount or shelf mount
Warranty
Two years
Part Numbers
Features & Options
Forced air cooling
Standard variable speed brushless DC fans
Three-stage charging
Standard three-stage (bulk, absorption, and float)
Communications adaptor
SWCA - optional adaptor allows PC or modem connection
Battery Temperature Sensor
BTS - standard remote battery temperature sensor for increased battery performance
Remote Control
SWRC - optional remote control and status indicator or RC8 - optional on/off remote control with status LED indicator
Stacking Interface
SWI - optional for series stacking of two identical PS units for 120/240 VAC output - not available on E models
Paralleling Kit
SWI/PAR or SWI/PAR/E - optional for paralleling two identical PS units for twice the power output
Conduit Box
PSCB - optional side mount conduit box for code-compliant DC wiring connections
Generator Start
GSM - optional Generator Start Module allows auto generator start
Auxiliary Relay
ALM - optional Auxiliary Load Module provides voltage controlled relays
Regulatory Approvals
UL Listed to UL 1741 and cUL 107.1-95 and CE compliant
Note: Specifications subject to change without notice.
Applications
Off Grid: Widely used throughout the world as a primary source of AC electricity, the PS offers sine wave, utility grade output power, high capacity battery charger, high-surge current ability (inrush current), and easy installation.
Backup Power: When the utility fails, the PS Series instantly supplies AC power to critical loads. When utility power returns, it can automatically recharge your batteries in preparation for the next power interruption.
