Marine Electronics | Boat Part | fishfinder

Updated every 2 to 30 Seconds*

Updated every 6 minutes

� Position
� Course over ground (COG)
� Speed over ground (SOG)
� Heading
� Rate-of-turn

� Name
� Call-sign
� ETA
� Breadth

� Ship type
� Destination
� Length
� Draft

*Commercial ships: varies between 2 and 10 sec. depending on speed and rate-of-turn. Boats with "Class B" transponders: every 30 sec.

Home > Communication > Automatic Identification System >

SEACAS AIS SYSTEM SEACAS-AIS150

List Price: US$1,159.00
Our Price: US$999.00
You Save US$160.00!

Availability: Usually ships the next business day
Product Code: SEACAS-AIS150

Description

Overview of SafePassage Products


	SeaCAS� suite of SafePassage AIS receiver products�the 300, 150 and 100�are designed to assist you in safely navigating through congested shipping lanes and adverse weather conditions, helping you avoid collisions. Each product uses an AIS receiver to provide you with real-time information about all nearby commercial and AIS-equipped ships. You�ll know a ship�s: � Type, size, course, speed. � Their Closest Point of Approach (CPA) and the Time of Closest Point of Approach (TCPA). � Name and call sign to hail other ships on VHF in case of an impending collision. If you are on a collision course, the SeaCAS SafePassage gives you the information and response time you need to make good decisions.

Information that saves lives

Navigation Software that is compatible with SEACAS SafePassage AIS

The CAPN

Fugawi Marine ENC

Nobeltec Admiral

Rosepoint Navigation Coastal Explorer

MaxSea Navigator+ Commander Explorer Professional

Digiboat's Software on Board (SOB)

GPSNavX & MacENC

Euronav seaPro UAIS

ICAN Regulus Aldebaran

Chartworx TheMap Yachting

Nobeltec VNS version 8.0

NavSim BOATCRUISER

Global Navigation's NavPak

Maptech Chart Navigator Pro

Transas Marine Navi-Sailor

Sea Clear II

P-Sea WindPlot II

Tridentnav ECS Standard

TIKI Navigator

Chart Plotters that are compatible with SEACAS SafePassage AIS

FURUNO NavNet vx2

SI-TEX ColorMax

Lorenz Electronics Excalibur World Map

SEIWA BARRACUDA NAUTILUS BARRAMUNDI

VDO Map Chart Plotters

JRC JMA-5300

Raymarine E-Series & C-Series

Garmin GPSMAP 392, 398, 492, 498, 2206, 2210, 3205, 3206, 3210 and all 2007 models.

FURUNO Chart Plotter GP7000/NT and Chart Plotter & Fish Finder GP7000F/NT

Standard Horizon CPV350, CP180, CP300, CP180i, CP155C, CP175C, CP1000C, CP500 all with software V. 11.06

NAVMAN 8120, 8084, 5607 & 5507

NORTHSTAR M121 and M84

How does AIS work?
Static and dynamic navigational data is sent via VHF from ship to ship. Thanks to GPS technology, this data can include a ship's position. Other information broadcast by AIS is electronically obtained from a ship's Gyro Compass.

SafePassage AIS 150

	Dual-band AIS Receiver and dGPS
	USB connectivity
	Serial connectivity
	GPS antenna
	GPS antenna cable
	Seamless interface with other hardware

The 150 boasts the same AIS collision avoidance performance and GPS capability as the 300, but uses an owner-supplied AIS antenna.

Full product specifications for the 150

	� Lightweight, compact design � Fast, easy USB connectivity � Low 1.2 watt power consumption � Receives data from as far away as 30 nautical miles � 16-channel GPS, WAAS and EGNOS enabled � Dual frequency: AIS1 161.975 MHz and AIS2 162.025 MHz simultaneously monitored � 25 kHz bandwidth � Baud rate 38400 bps � EMC certified EN61000-6-3:2001, EN61000-6-1:2001, IEC 60945 � 10-meter antenna cable (maximum cable length of 30 meters is available) � Receives all AIS VDL messages simultaneously on both channels � Uses industry standard IEC 61162-2/NMEA 0183 message protocol � Operating temperature ranges from 5 to 131 degrees Fahrenheit � Sensitivity to �107 dBm � GMSK demodulation � 70 dB adjacent channel rejection � SafePassageAIS is PC- and Mac-compatible � SafePassageAIS comes with a serial cable for chart plotter and radar connectivity



AIS 150 installation instructions

	The SafePassageAIS 150 can be installed in three easy steps.
	1. Mount your AIS antenna (purchased separately) and the GPS antenna (included with the 150). 2. Load the USB driver. 3. Install the SafePassageAIS 150 near your computer, chart plotter or radar. Connect the USB cable to your computer or the serial cable to your chart plotter or radar. There's no need to run a separate power line if you use the USB connector since power is supplied to SafePassage through the USB port. If you use the serial connector you need to power the SafePassage with 12V DC. NOTE: In the event that your vessel's 12V power supply or your inverter fails, your laptop's battery will act as an Uninterruptible Power Supply (UPS) for both your navigation system and SeaCAS SafePassage. Click here to download complete installation instructions in PDF format.