Maretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000^® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000^® compatible displays. With the appropriate transducer, the FPM100 reports either pressure or vacuum for a variety of applications including water pressures, oil pressures, hydraulic pressures, or system vacuum for detecting clogged filters.

The FPM100 also has a tank level mode, so that fluid levels in a tank can be monitored via a pressure transducer mounted at the bottom of the tank and transmitted over the NMEA 2000^® network. This allows you to monitor the fluid levels in tanks that are extremely deep, have internal structures, or are otherwise not suited for other tank level sensing technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so that you know the true level of the tanks.

The FPM100 is NMEA 2000^® certified so you can view any and all information anywhere on the vessel using a compatible NMEA 2000^® display. The FPM100 is a key component of Maretron's N2KView^® vessel monitoring and control system.

WARNING

Maretron pressure transducers are not approved for use with gasoline. If you wish to use the FPM100 to monitor pressures or levels of gasoline, you must obtain a pressure transducer that is approved for use with gasoline.

• Adapts up to six pressure transducers to the NMEA 2000^® network
• Each channel independently programmed to match pressure transducer characteristics
• Each channel independently programmed in pressure/vacuum mode or tank level mode
• In Tank Level Mode, measures levels of extremely deep or irregularly shaped tanks

Application

• Water Pressure
• Atmospheric Pressure
• Compressed Air Pressure
• Hydraulic Pressure
• Steam Pressure
• User Defined Pressure Sources
• Fuel Tank Level / Volume Remaining
• Fresh Water Tank Level / Volume Remaining
• Waste Water Tank Level / Volume Remaining

• Datasheet
• User's Manual (pdf)
• User's Manual (html*)
  Pressure Transducer Installation Instructions
• PT-0-xPSI-01 (pdf)
• PT-0-xPSI-01 (html*)
  Pressure Snubber Installation Instructions
• PT-SNUB-01 (pdf)
• PT-SNUB-01 (html*)
  Pressure Transducer Vacuum to 1 Bar Installation Instructions
• PT-V-0-1BAR-01 (pdf)
• PT-V-0-1BAR-01 (html*)

Documents marked as html* may be translated into other languages (best viewed in Internet Explorer).

Maretron’s Fluid Pressure Monitor (FPM100) can be used for one of two purposes, 1) to monitor pressure/vacuum, or 2) to monitor tank levels. Although a single FPM100 can be programmed to monitor both pressure/vacuum and tank levels, this particular example is for tank level monitoring.

This basic tank monitoring system monitors six tanks using Maretron’s 3.5” color display, a Fluid Pressure Monitor (FPM100) and six Maretron pressure transducers. The system can be calibrated for odd shaped tanks so you get precision tank level information. And since the tank capacity is programmable, you can see exactly how many gallons remain in the tank. You can even combine different tanks into a single gauge or display, eliminating the need to continually perform mental calculations.

Maretron’s Fluid Pressure Monitor (FPM100) can be used for one of two purposes, 1) to monitor pressure/vacuum, or 2) to monitor tank levels. Although a single FPM100 can be programmed to monitor both pressure/vacuum and tank levels, this particular example is for tank level monitoring.

This comprehensive tank monitoring system monitors six tanks using Maretron’s 8” touchscreen, a Fluid Pressure Monitor (FPM100) and six Maretron pressure transducers. The system can be calibrated for odd shaped tanks so you get precision tank level information. And since the tank capacity is programmable, you can see exactly how many gallons remain in the tank. You can even combine different tanks into a single gauge or display eliminating the need to continual perform mental calculations. The Ethernet gateway allows you to view tank information on a smartphone or tablet so you can observe tank levels while re-fueling from the dock. Finally, the Vessel Data Recorder (VDR100) keeps a complete record of all fluids added and consumed from the vessel while showing on a map where the fluids were added and consumed, with the GPS200 providing reference times and positions.

It is generally accepted that monitoring the vacuum after your Fuel Filter is the best way to detect clogging of your fuel filter and prevent untimely shutdown of your engines. This basic Fuel Filter Monitoring System includes Maretron’s Fluid Pressure Monitor, a vacuum transducer and a small display to display the vacuum level anywhere on the boat. In addition, the display can be programmed to generate an audible warning when the vacuum reaches a critcal level.