You are here: Home > Electrical Supply > Inverter Charger
Inverter Charger ( 110V AC to 12V DC) Inverter Charger ( 110V AC to 24V DC)
Inverter Charger ( 110V AC to 48V DC) Inverter Charger ( 220V AC to 12V DC)
Inverter Charger ( 230V AC to 24V DC)

Call Xantrex at 408.987.6030 for Tech Support

Call Magnum at 425-353-8833 for Tech Support

Call Outback at 360.435.6030 for Tech Support

Many systems incorporate an inverter/charger, which is a combination of an inverter, battery charger and transfer switch in one. The inverter portion converts DC power from an energy source into AC Power. The battery charger processes incoming AC power into DC power and recharges batteries using a multi-stage process, which helps assure maximum battery life. Some models are also able to automate supplementary power production with automatic generator start and stop capabilities.

Inverter Chargers:

A Xantrex inverter/charger is a combination of an inverter, battery charger and transfer switch into one complete system. When AC power is available, the inverter/charger recharges the house batteries. It also allows any surplus AC power to pass through and power downstream AC loads, such as a television set or microwave oven. When AC power is disconnected, the unit inverts DC battery power into AC electricity.

Xantrex inverter/chargers are available in different sizes and power ranges to suit just about any application.

Freedom 458

With filtered modified sine wave output, the Freedom 458 inverter/charger has the ability to run electrical equipment, appliances and even sensitive electronics. Perfect for any RV, the temperature controlled multistage charging ensures that your batteries are recharged quickly, and safety features such as automatic shut down protects your expensive deep-cycle batteries from excessive depletion.

Freedom HF

FREEDOM HF REDEFINED.
No Messy Wiring. Quick Installation. Minimal Battery Drain.

The new generation Freedom HF is equipped with quick-connect AC terminals and ignition lockout capability. The quick-connect AC terminals enable quick installation eliminating the need for strain relief clamps. The ignition lockout feature helps to minimize battery drain by disabling the inverter when the ignition is turned off.

Freedom SW

The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. The second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is ‘Generator Support Mode’ which enables the Freedom SW to supplement a generator¹ when AC loads exceed the generator’s capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.

Freedom HFS

True sine wave 120 Vac inverter/charger with built-in transfer switch. Designed for recreational and commercial applications.

The new generation Freedom HFS is equipped with quick-connect AC terminals, ignition control capability and programmable smart battery management logic. The quick-connect AC terminal on both AC input and output enables incredibly easy installation. The ignition control feature minimizes unintended battery drain. The new Freedom HFS is designed for cold harsh winter environment with consistent performance down to -20°C.

The Freedom HFS Inverter/Charger features true sine wave output and is designed to operate sensitive electronics like entertainment systems and appliances in boats, RV’s and commercial trucks. The Freedom HFS is available in two models: 1000 watts with a 55-amp charger and a 2000 watts with a 55-amp charger.

Newmar PS series

The PS Series inverters produce high efficient, pure sine wave output from 12 or 24 volt battery input with high surge power for motor start making it ideal for marine applications. A power saving mode, with user friendly adjustable set points, conserves batteries when not in use. A remote control/display panel and front panel indicator lights allows for easy analysis and control.