408.987.6030 for Tech Support
Call Magnum at
for Tech Support
Outback at 360.435.6030
for Tech Support
Many systems incorporate an inverter/charger, which is a combination of an
inverter, battery charger and transfer switch in one. The inverter portion
converts DC power from an energy source into AC Power. The battery
charger processes incoming AC power into DC power and recharges batteries using
a multi-stage process, which helps assure maximum battery life. Some models are
also able to automate supplementary power production with automatic generator
start and stop capabilities.
A Xantrex inverter/charger is a combination of an inverter, battery charger
and transfer switch into one complete system. When AC power is available, the
inverter/charger recharges the house batteries. It also allows any surplus AC
power to pass through and power downstream AC loads, such as a television set or
microwave oven. When AC power is disconnected, the unit inverts DC battery power
into AC electricity.
Xantrex inverter/chargers are available in different sizes and power ranges
to suit just about any application.
With filtered modified sine wave output, the Freedom 458 inverter/charger has
the ability to run electrical equipment, appliances and even sensitive
electronics. Perfect for any RV, the temperature controlled multistage charging
ensures that your batteries are recharged quickly, and safety features such as
automatic shut down protects your expensive deep-cycle batteries from excessive
FREEDOM HF REDEFINED.
No Messy Wiring. Quick Installation. Minimal Battery Drain.
The new generation Freedom HF is equipped with quick-connect AC terminals and
ignition lockout capability. The quick-connect AC terminals enable quick
installation eliminating the need for strain relief clamps. The ignition lockout
feature helps to minimize battery drain by disabling the inverter when the
ignition is turned off.
The NEW GENERATION Freedom SW series represents highly sophisticated and
advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W
with 100 A charger models. The second generation 2000 watt model has been
completely redesigned to include many of the same great features found in its
high power counterpart.A key feature enhancement is ‘Generator Support Mode’
which enables the Freedom SW to supplement a generator¹ when AC loads exceed the
generator’s capacity. The new generation models also feature improved AC
transfer/AC input detection time, providing the ability to transfer AC loads to
batteries in less than 10 milliseconds when the incoming grid or generator power
is lost. Connected loads are almost unable to feel the power transition due to
this quick transfer time. Both models are approved to UL458 with marine
supplement, CSA, ABYC and FCC, Class B requirements.
True sine wave 120 Vac inverter/charger with built-in transfer switch.
Designed for recreational and commercial applications.
The new generation Freedom HFS is equipped with
quick-connect AC terminals, ignition control capability and programmable smart
battery management logic. The quick-connect AC terminal on both AC input and
output enables incredibly easy installation. The ignition control feature
minimizes unintended battery drain. The new Freedom HFS is designed for cold
harsh winter environment with consistent performance down to -20°C.
The Freedom HFS Inverter/Charger features true sine wave output and is
designed to operate sensitive electronics like entertainment systems and
appliances in boats, RV’s and commercial trucks. The Freedom HFS is available in
two models: 1000 watts with a 55-amp charger and a 2000 watts with a 55-amp
Newmar PS series
The PS Series inverters produce high efficient, pure sine wave output from 12 or
24 volt battery input with high surge power for motor start making it ideal for
marine applications. A power saving mode, with user friendly adjustable set
points, conserves batteries when not in use. A remote control/display panel and
front panel indicator lights allows for easy analysis and control.