VETUS Hydraulic Bow Thruster 905 Lb Including Hydro Motor 22Kw, 29HP, BOW410HMD

(No tunnel, Control, Cable included)

The hydraulic motor is driven by a hydraulic pump. If a hydraulic pump and associated tank are already installed on board, then , in most cases, this assembly can be used for driving the bow thruster too. In addition to the pump and the hydraulic stage tank, Vetus can supply the required load sensing and control devices, as well as the high pressure hydraulic hoses, complete with end fittings.

All these hydraulic bow thrusters may be fitted to fiberglass, steel or aluminum tunnels or used as a stern thruster using the appropriate installation kit

The three most powerful vetus bow thruster can also be driven in a safe manner using a specially prepared diesel engine, instead of pump on the main engine.

In this case, the matching hydraulic pump will be supplied as part of the powerpack. Installing a powerpack on board can considerably reduce the required generator set capacity, by operating hydraulic functions which are normally electrically powered.

Technical data	121 lbf	210 lbf	352 lbf	507 lbf	665 lbf	905	1215
Hydraulic motor power kw(hp)	3.5(4.7)	6.0(8)	9.5(12.7)	12.5(16.8)	20 (27)	22 (29)	33 (44)
hydraulic motor speed, rpm	3000	4100	3300	1900	2000	1920	1920
hydraulic motor capacity cu.inch/rev	.25	.25	.42	1.03	1.64	2.75	2.75
flow rate gal/min	3.4	4.7	6.3	8.85	15	24	24
operating pressure, psi	2393	3335	3625	3336	3190	2610	4061
Internal tunnel diameter (in)	5 29/32	7 9/32	9 7/8	11 13/16	11 13/16	15 3/4	15 3/4