G2 Second Generation Higher Efficiency

Our New Gear Pump Offers Industry-Leading Reliability and Performance in a Smaller, Lighter, Quieter Package. We are excited to introduce our new 2 and 3L configurations suitable for cylinders all the way to 40Ci.

High Efficiency – G2’s smaller gear diameter minimizes oil leakage at bearing faces thus improving volumetric efficiency.
Low Noise – New industry design offers significantly quieter operation
Light Weight & Compact  – Small footprint offers greater installation flexibility
Wide Range Of Products – From 600 to 3000cc/min, 12v and 24v options

Hydraulic Ports: 1/4” NPT

Voltage: 12Vdc or 24Vdc

Max Pressure: 55 bar

EMC Compliance to: EN 60945:2002

Ignition Protection to: EN ISO 8856:2017/ISO 8846:1990 SAE J1171

Motor Protection: IP55

Motor Type: Permanent Magnet

Environmental: RoHS 2 Compliant  |  2011/65/EU & EU/2015/863

Motor Brush life: 4000+ hrs under normal use

Lead Wire: 650mm Long: UL1015 105°C AWG#16 (1.5mm2)

Finish: Powder-coated body

Professional Solutions for Hydraulically Steered Boats

Industry Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units.

Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units.

The smaller footprint of the compact gear pump increases installation flexibility.

Lower noise and vibration make the gear pump particularly suitable for sailboat installations.

Suitable for balanced or unbalanced cylinders.

All models available for both 12v and 24v systems.