The new Power Series by Maretron replaces standard mechanical circuit breakers and switches with state-of-the-art digital power distribution. Customers looking to achieve the power and convenience of advanced home automation for their boats will appreciate MPowerТs seamless, reliable operation as well as simple and cost-effective installation.

MaretronТs new CLMD12 offers programmable multi-channel DC electronic load modules in an innovative, scalable configuration, each capable of switching up to 5, 10, or 12 Amps with a total current capacity of 75 Amps. The CLMD12 provides fast switching and low-loss solid state ON/OFF switches. The CLMD12 connects directly to the NMEA 2000о network, allowing breakers to be turned on and off from a Maretron DSM-Series display or any device running Maretron N2KViewо (including MaretronТs TSM-Series multifunction displays and MBB-Series black boxes or smart phones/tablets running N2KView software).

Additionally, since the CLMD12 supports standard NMEA 2000 messages, it can be controlled by any NMEA 2000 device. The CLMD12 easily handles resistive DC loads like lights and inductive DC loads like pumps and motors. An added benefit of the CLMD12 is that it reports the current through each of the 12 breakers. This allows you to determine if loads are drawing too little electrical current such as burnt-out bulbs, or if the loads are starting to draw too much electrical current.

* CLMD12 requires configuration using Maretron USB100 or IPG100 plus PC running N2KAnalyzer V3.

• NMEA 2000о Interface
• IP67 Rated
• Ignition Protected
• Opto-Isolated from NMEA 2000о, eliminating potential ground loops
• Twelve (12) dimmable Electronic Circuit Breakers (ECBs) for ON/OFF control over NMEA 2000о network
• Each breaker is capable of carrying up to 5,10, or 12 Amps
• Individual breaker electrical current monitoring
• Breakers can have power-up states defined (ON, OFF, or previous states)
• Breakers can be locked against inadvertent actuation
• Seven (7) discrete inputs configurable as Active High, Active Low
• Automatic ECB over current shutdown
• Automatic ECB thermal shutdown (Over temperature Protection)