Home > Plumbing & Pump > Water Hose >

TRC Tridentflex Water Hose, 1 1/4" ID, 1 5/8" OD, 12 1/2'
TRC Tridentflex Water Hose, 1 1/4" ID, 1 5/8" OD, 12 1/2'

Brand New with Factory's Warranty
List Price: US$235.60
Our Price: US$148.50
You save US$87.10!

Availability:: Usually ships the next business day
Product Code: TRC-10011441B

Description Extended Information

Wet exhaust systems have decided advantages over dry exhaust systems. They are quieter, cleaner and cooler; and do not pose a fire or burn hazard (eliminating the need for insulation beyond the water injection point). Today, most pleasure boats with inboard engines (for power, auxiliary, generator) have wet exhaust systems.

Typically, raw water is pumped from the engine intake seacock and strainer; through a heat exchanger, possibly oil
cooler(s) and water injection nipple or mixing elbow at the exhaust manifold; and its dumped with the exhaust gas (cooled from 1100 F. + to less than 212F. on most engines) into the wet
exhaust piping and out the stern. Most commonly the latter is a combination of flexible rubber exhaust hose, bellows & elbows; sometimes fiberglass or stainless steel pipe (at least for connectors); and mufflers or silencers. Flexible hose, bellows an elbows are easier and simpler to run than rigid pipe. They are not subject to corrosion or stress cracking; and they absorb more engine movement, vibration and noise. While the highest quality black rubber exhaust withstands maximum continuous temperatures up to 250F., some high performance engines emit wet exhaust at 300 to 500 F. Here only silicone rubber can be used.

Premium wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Extra heavy tube and cover with helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sani chemicals, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** (see below). Black High Temp EDPM Rubber 250F (121C). ISO 13363 Std. Pending.

1/2" to 10"
13mm to 254mm

Black w/ Blue Stripe

I.D.: 1/2" (13mm) to 4" (102mm)
Coils: 50' (15m)
Lengths: 12.5' (3.8m) & 6.5' (1.9m)
Note: The price is subject to change at any time without any notice. Not responsible for any typographical errors. Any products can be cancelled from sale at any time.
  • All products sold here come with Full Manufacturer's Warranty
  • Email us at
  • [email protected] for any quesitons
  • WarningWARNING: This product can expose you to chemicals including Di-n-hexyl Phthalate, DnHP, which is known to the State of California to cause reproductive harm, and Vinyl Chloride which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Be the first to write a review for this product

Browse for more products in the same category as this item:

Plumbing & Pump > Water Hose